Search for your question
If you don’t found the answer to what are you searching for, please use the Feedback button to submit a new question.
Booting your computer with Elive
There’s a special key in every BIOS (when the computer first boots) that makes you able to boot from another device that is not its hard disk.
You can either enter in the bios to configure the boot order or to hit the key that selects the device to boot “only this time”, the second option is suggested.
In short, you simply need to turn ON your computer, then immediately press multiple times the F’ key that a message should tell you something like “boot menu” until a menu appears, then just select the device which you want to boot from (the one that contains Elive in your USB or DVD).
This special F’ key is normally F12 in Acer computers and ESC in the Asus ones, you can try all the F’ keys or better search which F is in a list like here, other common F’s are F10, F2, F1 and F8
Here is the list of function keys used by a manufacturer:
- Acer – F2 or delete
- Asus – F2, F9 or delete
- Compaq – F10
- Dell – F2
- Emachines – tab or delete
- HP – Escape, F1 or F10
- Lenovo – F1 or F2
- NEC – F2
- Packard Bell – F1 or F2
- Samsung – F2 or F10
- Sharp – F2
- Sony – F1, F2 or F3
- Toshiba – Escape, F1, F2 or F12
If your computer uses those newer BIOS that ships with Windows 8 with the restriction to use other operating systems, you need to enter in your BIOS setup and basically:
- disable “secure boot“
- disable “UEFI mode“
- enable “legacy boot“
- enable “CSM“
If you need more info about the UEFI and “Secure Boot” of the bios make a look to our other FAQ article
There’s some other interesting articles about this topic: